Currency Displayed in
A pair of new replacement Smooth Vise Jaws for the 4 inch 101028 Wilton Vises. (about 1953-1974)
For those of you that have a Model Number, these jaws fit Wilton Vise 101028.
This A-2 Tool Steel is Heat Treated to 54-56 Rockwell. After Heat Treating these jaws are surface ground flat and then squared.
Supplied with (4) 5/16:18 Socket Head Cap Screws.
A note on the dowel pins: If your center dowel pin has rusted into the vise and sticks out a bit (which is common), I have added a 1/32 clearance hole that fits over the pin diameter. That way the stuck dowel will not interfere with the fit of your new replacement jaws.
Made in the USA.
Length: 4.00
Width: 1.00
Thickness: 5/8
Distance between screws: 2-3/8
Screw Centered in width:
Screw Size: 5/16