A pair of new replacement Serrated Vise Jaws for the 4 inch 101028 Wilton Vises.  (1953-1974) 

For those of you that have a Model Number, these jaws fit Wilton Vise 101028.  The P/N for the Serrated Jaws is 2903160.

A-2 Tool Steel is Heat Treated to 54-56 Rockwell. The colorful pattern on the serrated jaws happens during the Heat Treating process when nitrogen is used. After Heat Treating, these jaws are surface ground flat and then squared.

Supplied with (4) 5/16:18 Socket Head Cap Screws.  

These are Premium Handcrafted Jaws. Many imports use powdered metal that gets injected into a mold to save time. I have seen many break at the screw holes. My jaws should be the last you ever buy.

A note on the dowel pins:  If your center dowel pin has rusted into the vise and sticks out a bit (which is common), I have added a 1/32 clearance hole that fits over the pin diameter.  That way the stuck dowel will not interfere with the fit of your new replacement jaws.

Made in the USA

Questions?  Contact Kevin:  mountainproduct@gmail.com

Length                                       4.00         

Width                                         1.00         

Thickness                                     5/8          

Distance between screws.        2-3/8        

Screw Centered in width.     

Screw Size                                   5/16