Loading... Please wait...

3 x 3/4 x 1/2 Smooth Wilton Vise Jaws: Fits the Wilton #8300 and 9300

Hover over image to zoom

  • Image 1
  • Image 2
  • My good friend Bill M. did a nice job restoring this 9300 and adding a smooth set of jaws.
  • Image 4
1.000 LBS
Free Shipping

 Product Description

A pair of new replacement Smooth Vise Jaws for the 3 inch #8300, and 9300 vises.

For those of you that have a Model Number, these jaws fit Wilton Vise 101015.  The P/N for the Smooth Jaws is 2903090.

The A-2 Tool Steel is Heat Treated to 54-56 Rockwell.  After Heat Treating these jaws are surface ground flat and then squared.

A note on the dowel pins:  If your center dowel pin has rusted into the vise and sticks out a bit (which is common), I have added a 1/32 clearance hole that fits over the pin diameter.  That way the stuck dowel will not interfere with the fit of your new replacement jaws.

Supplied with (4) 1/4:20 Socket Head Cap Screws. 

These are Premium Handcrafted Jaws. Many imports use powdered metal that gets injected into a mold to save time. I have seen many break at the screw holes. My jaws should be the last you ever buy. 

Made in the USA.


Questions?  Contact Kevin:  mountainproduct@gmail.com



Length                                         3.0           

Width                                              3/4          

Thickness                                       1/2          

Distance between screws.           2.0         

Screw Centered in width.     

Screw Size                                  1/4  Socket Head Cap Screws.

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...


Copyright 2019 WiltonViseParts. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter